ON RIDGE VENTS
ON RIDGE VENTS
Advantages of the Ridge Vent
• Unique raised hood design is engineered for the highest possible uninterrupted attic air removal.
• Easy installation over new or existing roofing.
• No extra framing required and maintenance free.
Available in different heights based on application.
1″ – Metal Roofing
2.5″ – Regular Tile Profile
5″ – Hi-Tile Profile
Special heights also available upon request.
Net Free Area
1 piece per carton
4′ – 288 sq. in.
6′ – 432 sq. in.
8′ – 576 sq. in.
10′ – 720 sq. in.
Galvalume
26 gauge
Painted
26 gauge
Fifteen Stock Colors
Six Premium Colors
See Color Charts below
Non Stocking – Special Order Only
Drawing
Installation instructions
1. Cut out a hole approximately 3 inches from both sides of ridge peak extending to accommodate the length of the vent.
Approximate Cut Out Sizes
4′ – 6″ X 46″
6′ – 6″ X 70″
8′ – 6″ X 94″
10′ – 6″ X 118″
2. Place ridge ventilator over the hole and nail down using 1 1/4″ roofing nails or 1.5″ Neoprene screws spaced 8-12″ on center. Roofing cement should be used on all adjacent roofing materials and nail heads to prevent water leakage.
15 Standard Colors, Galvanized/Galvelume, 6 Premium Colors and Custom Colors Too!
All our standard colors meet energy star requirements.
Cool-Coat Chemistry Colors available in Standard and most Custom Colors.
Colors are an approximation.
Actual production colors may vary slightly from the samples on this website. To get a truer color please contact us for our printed Color Chart.
All coated products available smooth or embossed finishing.
Colors are an approximation.
Actual production colors may vary slightly from the samples on this website. To get a truer color please contact us for our printed Color Chart.
* Meets Energy Star Requirements
Need Help? Call Us at 800.248.3456
Or complete our response form to receive more information on our products and specifications.
TAMCO IS YOUR ONE-STOP FOR
METAL, ALUMINUM & VINYL ROOFING PRODUCTS